Header Ads

Nature of Orgone Energy

The essence of Orgone energy is the Ether energy. But when it comes to Ether, we need to clarify the dielectric in Ether, inertia in Ether, etc. And how they relate to the Orgone energy. Then we will understand the nature of Orgone energy

Nature of Orgone Energy
Build an Orgone accumulator to create a generator

Dielectric energy in Ether: Orgone energy

What we consider to be atoms is, in fact, they are just dielectric condensation in vortex form in Ether. The electron does not exist when the atom is just a condensing dielectric.

DIELECTRICITY  Is the nature of dielectricity a conspiracy or human ignorance?



Does an Electron 'particle' exist? N. Tesla, Heaviside, JC Maxwell & CP Steinmetz said NO



Nikola Tesla November 1928 interview:
On the whole subject of matter, in fact, Dr. Tesla holds views that are startlingly original. He disagrees with the accepted atomic theory of matter, and does not believe in the existence of an “electron” as pictured by science.

“To account for its apparently small mass, science conceives of the electron as a hollow sphere, a sort of bubble, such a bubble could exist in a medium as a gas or liquid because its internal pressure is not altered by deformation. But if, as supposed, the internal pressure of an electron is due to the repulsion of electric masses, the slightest conceivable deformation must result in the destruction of the bubble! Just to mention another improbability...” - Nikola Tesla
Article: “A Famous Prophet of Science Looks into the Future” (Popular Science Monthly)

“My ideas regarding the electron are at variance with those generally entertained. I hold that it is a relatively large entity carrying a surface charge and is not an elementary unit (particle). When the ‘electron’ leaves an electrode of high potential and in a high vacuum it carries an electrostatic charge many times greater than normal.” – N. Tesla

      “In the theoretical treatment of these electrons we are faced with the difficulty that electro-dynamic theory by itself is unable to give an account of their nature.” “For since electrical masses constituting the electron would necessarily be scattered under the influence of their mutual repulsions, unless there are forces of another kind operating between them the nature of which has hitherto remained obscure to us.” - Einstein on electrons; “Relativity”, by Albert Einstein, Random House Publisher, 1916

     “To describe an electron as a negatively charged body is equivalent to saying that it is an expanding-contracting particle. There is no such condition in nature as a negative charge, nor are there negatively charged particles. Charge and discharge are opposite conditions, as filling and emptying, or compressing and expanding are opposite conditions.” – W. Russell

Material is just a dielectric that condenses in the Ether. Each different chemical element will have different tension and vortex. This can be seen when elementary particles such as Proteins have the frequency of Larmor precession. Expanding, the entire galaxy will be shaped like a tornado, and the funnel-shaped top - along the axis that represents the frequency Larmor precession.

When two different matter (two different chemical elements) are combined to create a special space (Orgone accumulator, or Orgone box), the dielectric energy will be released in the form of Radiant energy.

​Orgone Free Energy - Orgone Energy Motor



The Elite thought they have destroyed all the evidence of this device.

What the Elite did not have in sight is surfacing as we speak, on the internet.

This must be a sign from God, that the game is changing. And the shift of power is returning in the hands of the people.

With this information, spreading like wildfire on the internet. The Elite will lose billions of dollars.

Find Out The Thruth Before It's Not Too Late: The most censored free energy device out there

​P.S.: This information is being attacked, and soon may be banned.

Example of dielectric energy to elucidate Orgone Energy: Co-axial Cable Electrets

This example shows the similarities of two systems that harness electricity from the Passive System: Orgone energy and the energy that comes from Electrets.

There is a device which is not widely known. It is called an "electret" and I have to confess that my knowledge of them is almost zero. Essentially, an electret is a passive device which pours out electrical energy. I do not know where that electrical energy comes from. The Wikipedia encyclopaedia has some highly technical information on the subject remarking that "tunnel ionisation" is a process in which the electrons in an atom can pass through the atom's potential (voltage) barrier and escape from the atom. In an intense electric field, the potential barrier of an atom is distorted drastically and so the length of the barrier through which electrons have to pass, decreases and electrons can escape quite easily. The atoms spoken of here, might be those of a dielectric which could form an electret.

One method which has been used in the past to make an electret, has been to alter the structure of certain types of wax. A more convenient method is to use a reel of standard co-axial cable which is the sort of cable used to connect television aerials to television receivers:


An electret of that type can produce 10,000 volts at 10 milliamps. The current flow of 10 milliamps sounds trivial and of no consequence, but that is not actually the case as the power of 10 milliamps at 10,000 volts is 100 watts, so imagine a 100 watt light bulb brightly lit and not needing any power input at all to make it shine. That is actually, quite impressive.

PLEASE NOTE THAT 10,000 VOLTS WILL KILL YOU AND INVESTIGATING A DEVICE OF THIS TYPE IS NOT FOR PEOPLE WHO ARE NOT ALREADY FAMILIAR WITH WORKING SAFELY WITH VERY HIGH VOLTAGES. MEASUREMENTS MUST ONLY BE MADE WITH HIGH-VOLTAGE EQUIPMENT. LET ME STRESS AGAIN THAT I AM NOT ENCOURAGING YOU TO MAKE OR EXPERIMENT WITH ANY FORM OF HIGH VOLTAGE DEVICE AND THAT THIS INFORMATION IS FOR YOUR INTEREST ONLY.


The arrangement with a single reel of cable is:


Unfortunately, life being what it is, it has been found that when you try stepping that voltage output down to a more convenient voltage, there can be losses which lower the output power to just 50 watts. That sounds disappointing until you put it in perspective. This is a device which has the same output as a 50 watt solar panel in full sunlight, mounted at the optimum angle and positioned near the equator. But, the electret costs far less, produces that full output at any latitude and at night, while the solar panel is restricted by cloud cover, distance from the equator, needs an expensive mounting system, ideally should rotate to track the position of the sun, and only works when there is a high light level. So, the electret's fifty watts of continuous power is not an insignificant thing when you compare it to the other options available. These electrets can be stacked in parallel and an output in the kilowatts range is possible.

Let me stress that I personally have not yet made or used a co-axial cable electret, and so the information here comes from an experimenter who has done this. Also, while the information here is intended to help anyone who wishes to experiment along these lines, the fact that it is here must not be interpreted as my encouraging you personally to try to make or use an electret of this or any other type. If you choose to do that, then you do so entirely at your own risk and nobody other than yourself is liable should any mishap occur.

The following procedure has been used to convert a 500 foot (150 metre) coil of 1/4", type RG6/U 75-ohms, 18-AWG co-axial cable into an electret:

  1. Make sure that neither end of the cable has the screen touching the central core.
  2. Make an electrical connections to both the screen and the core at both ends of the cable.
  3. Place the whole of the spool of cable inside an oven.
  4. Heat the oven (a genuine oven and not a microwave) slowly to 350oF (180oC).
  5. Maintain the heat until the inner plastic insulation is so soft that it can be permanently indented. This plastic must not get too soft and reach the flowing stage, nor must it get burnt or develop holes which allow arcing - if that happens, then the reel of cable is a throwaway. The objective here is to get the plastic to lose it's polarisation memory.
  6. When the inner plastic sleeve has reached this level of softness, apply a steady DC voltage of about 10,000 volts to the connections already made to one end of the cable (to the screen and to the core). Although any voltage from 12V to 20,000V can be used, a 10 mA current draw can be expected when using 10,000V. Maintain this applied voltage at the high temperature for about ten minutes.
  7. Turn off the heat and let the oven cool down gradually at its own rate to the 25OC to 30OC region, keeping the high voltage attached to one end of the cable.
  8. Disconnect the DC voltage.
  9. Connect the cable screen to the central core at both ends of the cable.
  10. Leave the cable at room temperature for five to seven days. During this time, the polarisation of the plastic is reorganising. After this time, the electret is ready for use as a power source.

Apparently, the energy comes from matter, or dielectric energy. Orgone energy is the same. It is a quiet system but it can accumulate energy. The energy in the Orgone accumulator is formed by dielectric reflection.

Related: How To Build An Orgone Accumulator

No comments

Powered by Blogger.