Exploiting Electricity from the Earth's charge - Wireless Power Transmission

The pioneer of power transmission without wires, it's NikolaTesla. Its scientific background is different from Einstein's theory of relativity, which is the Ether. According to the Ether doctrine, there is no so-called gravity. Accordingly, today's Newton, Einstein, and quantum physics theory is incomplete. In fact, that has been and is present.

However Tesla did not perfect his theory of Ether. Other physicists did not develop it after the theory of relativity was born. Newspapers praised and honored science. But, the truth is that science is inherently contradictory and incomplete.

Evidence for this problem?
According to modern science, a theory of modern physics suggests that the "zero point" of energy contains tremendous energy. But another branch of physics, they say, "zero-point" energy contains very small energy. You can find this on Wikipedia.

What is wireless transmission, in essence?

First of all, please give a mess of information regarding Wireless Power Transmission:

• Energy "zero points"
• Wireless Power Transmission
• Free energy generator
• The program provides free electricity for Tesla's global
• Theory of Ether and relativity
• The suppression and rejection of science and the free electricity and Energy industry

A series of information is related to each other, but the transmission of non-wire power is a good consequence and the source of a program? In essence, what is it?

#1 Solve the nature problem

Tesla said that there is a transmitter, which fills the universe, governing issues such as light speed, energy, gravity, and electromagnetic waves. And it's the Ether. Can exploit endless energy from this Ether.
Another important and essential nature in Ether, which is matter, energy, is also information. To make it easier to understand, you can call it bits of information - as it is today.
Information can be amplified!
Information can be duplicated!
Only a small amount of energy is needed to amplify the information. This you can see in 3G technology, 4G today.
Thus, energy can be transmitted without wires.
Corollary: Electricity can be transmitted without wires.
Does this violate energy conservation laws?
IS NOT!
As originally mentioned, energy is available in the universe. The problem here is how to summon energy without wires. In other words, energy amplification - replication type.
What role does "zero-point" energy play here?
Tesla's concept of zero-energy energy is not the same as current science, and does not contain the current conflict. Because Tesla's "zero point" energy is consistent with the Ether, meaning no gravitational concept is needed, and the speed of light is not the greatest.
Energy "zero points" according to Tesla, very broad meaning. In terms of electricity, the "zero-point" energy appears to be the collapse of a magnetic field, or the collapse of electricity. Electricity and magnetism are two sides of a coin. At the time of the collapse of the magnetic field, electricity appears.
It is this collapse that is how electrons (electrons) relate to each other at a certain frequency. Energy amplification, mathematically related to "zero point"
Thus, the problem of Wireless Power Transmission is actually just a consequence of the process of exploiting power from the universe.

# 2 Where is energy to ensure that it does not violate energy conservation laws?

According to Tesla, it is radiant energy. See this article for details: Unraveling Nikola Tesla's Greatest Secret: Radiant Energy
Two things that current science (not following Ether doctrine) are not clear:

1. It is not clear where the energy from the Spin of the Electron comes from
2. Energy The Electron's Spin is not naturally lost over time.

Radiant energy will transmit energy to the electron. The problem now is to exploit it to generate electricity: by "summoning" information (amplifying)
Here are some conclusions of Tesla (according to Ether theory):

Tesla used high voltage at gigahertz frequencies for his electropulsion system. The propulsion of a vehicle powered by a Tesla drive is by the use of an additional AC generator at the back (which stiffens the space-time continuum behind the vehicle) and a DC ‘brush’ generator at the front (which weakens the space-time continuum in front, causing the vehicle to be pulled forwards).
Tesla was very astute. He deduced that ‘empty space’ actually contained:

1. Independent carriers which permeate all space and all matter and from which all matter is made. These carry momentum, magnetism, electricity or electromagnetic force, and can be manipulated artificially or by nature.
2. ‘Primary Solar Rays’ (starlight) which travel at the speed of light, having frequencies far above X-rays, gamma and UV radiation.
3. ‘Cosmic Rays’, particles in space propelled by the Primary Solar Rays.
4. X-rays, Gamma rays and UV electromagnetic waves, all of which travel at the speed of light.
5. Ordinary visible and Infra-Red electromagnetic waves which travel at the speed of light.
6. Rapidly varying electrostatic force of enormous potential, emanating from the earth and other gravitational bodies in space.

( Source: Equipment to extract Electricity from The Air - Nikola Tesla )

How many ways to transmit electricity - wireless? and which is the best way?

In fact, lightning strikes are like the phenomenon of wireless conductivity. But jute is just a spontaneous phenomenon, but its nature is the phenomenon of air ionization when there is a voltage difference.
We need to consider power transmission without Tesla's wires. As far as I know, there are three main ways in Wireless Power Transmission:

1. Filling in the air
2. Power transmission with the environment is Earth
3. Transmission from Tesla's Wardenclyffe tower model

With Tesla's Wardenclyffe tower model, some YouTube videos have been successfully implemented. But perhaps they do not understand the nature of the problem, and the video only demonstrates that: there is not much energy to exploit. Perhaps this is a video sponsored by the electricity industry, to propagate that: free energy generators are impossible. Yes, conspiracy theory.
With the other two ways of transmission, it is even more hidden from conspiracy theories and the suppression of the electricity industry, as well as by the scientific world for money. Because it contains a way to extract electricity from the universe, free energy for humanity.

#1. Which wireless transmission method is best?

That's the number 2: power transmission on earth. There is a document that Tesla's son has successfully carried out wireless transmission on Earth, at a distance of several miles. See here: Arthur Matthews and Son of Tesla
Why is it the best way? Because it hides a way to harness electricity from the earth's charge. Moreover, perform mining easily.

#2. I would like to introduce a quote about how to extract electricity from the earth's charge:

BACKGROUND INFORMATION & CONCEPT

With alternating electrical current, electrons do not move from point "A" to point "B" as commonly envisioned! Electrical potential (oscillating electrons) at point "A", results in harmonic electron activity at point "B", when the grounding switch (circuit) is closed. That is to say, point "B" supplies it's own electrons and mirrors the activity of point "A". Impulsing (turbulence) by magnetic induction causes electrons to be pulled into the system, which then oscillates. When the magnetic field collapses (becomes absent) the electrical potential returns to it's natural background level.
Several major flaws are present in the conventional 60 cycles per second method of electrical power generation and it's iron core transformer system. This system is handcuffed by the inverse relationship of volts to amperes. This represents a stodgy, inflexible inheritance, courtesy of Mr. T.A. Edison and his concept of electrical power generation.
Nikola Tesla stood, almost alone, against Edison and managed to prevail with his Alternating Current system. Without the alternating current system, electronic things in the modern sense would not exist.
This report will be concerned with some of the extensions and benefits of the alternating current electrical system. This study will limit it's scope to air core coil transformers at radio frequency and upwards. The electrical power produced by this method is inverted to Direct Current and then to Alternating Current as required for popular usage. There are several important advantages of this system over conventional power generation.
Start with two coils (separate-apart), one being a reactor coil (L-1) and a second coil (L-2), being the reactant coil. Magnetic field fluxing (off-on of the electrical source) causes inductive reactance of L-1 which replicates by induction in L-2. Pulsing of the magnetic field (from L-1) in the presence of L-2, generates electrical potential. For example, should the L-1 coil have ten turns, with an imposed AC. potential of 1,200 volts. This results in each turn of L-1 acquiring 120 volts of potential. This induced magnetic field, then replicates itself in each turn of the L-2 coil. The L-2 coil may have one or many hundreds of turns. Modern encapsulation techniques makes high frequency and high energy controllable.
Let's take another important step in this air-core transformer process. For purpose of discussion, let the value of inductive reactance at 60 cycles per second, equal one. Each time the frequency is doubled, the effectiveness of induction is squared. At about 20,000 Hz, when radio frequency is achieved, the electrons begin spinning free, outside of the inductor and they become increasingly free of the inverse relationship of volt-amperes. From this point on, they replicate by the inductive process as V.A.R.. That is to say, volts and amperes are equal, until resistance (work) is introduced. Therefore, additional, not previously available electrons become incorporated for a very large net gain in potential. This gain is real !
The quality of the grounding system determines the effectiveness of this method of producing electricity. A handy reference to locate the negative grounding areas for power generation can be found in the Aeromagnetic Map Studies of the US Geological Survey. They provide an excellent method for locating the best sites for optimum negative grounding areas.
When this method is combined with the induction coil system, already described, it provides an electrical power generating system millions of times more efficient than any known conventional method.
This new system ("E.E.S. II") is uncomplicated, physically small and it is inexpensive to build. The technology required for it's construction already exists. Maintenance is near zero, as there are no moving parts. Once operating, this system could last forever.
Small mobile E.E.S. II units are already available as replacements for the batteries used in electric automobiles. Larger E.E.S. II units can be provided as a replacement source of power for hotels, office buildings, subdivisions, electric trains, manufacturing, heavy equipment, ships, and generally speaking, any present day application of electrical power.


Diagram of electricity exploitation from the ground:

The study was conducted according to the schematic in Fig.2.

Placing of coil windings - as a Tesla transformer: primary on the base of the secondary.

 

Measurement of current was carried out by a DC ammeter on the PSU. Current consumption in the above schematic is 0.3 A. The value of voltage U2 at the output ends of the winding L2 is calculated by the formula: U2 = Um/N1.N2 = 14/8.463 = 810.25 V

where

Um is the voltage, 14 V;

N1 is the number of primary turns and

N2 is the number of secondary turns (see. Table).

Note. The formula does not take into account the resistance of the transistor’s base-emitter pn junction nor that of the connecting conductors.

Experimentally determined values of voltage - largest breakdown in the air gap between the initial winding ends at L2 point of discharge. The magnitude of the voltage was 500-700 Volts. Frequency: 1.1 MHz measured experimentally by the use of a frequency generator.

When connecting the circuit (see. Fig. 2) to the constant power supply, power consumption was 0.3 x 14 = 4.2 W and this power can be called a complete network power consumption of 4.7VA. On output of the L2 winding we obtain (at the base of the coil) current of about 0.3 A and a voltage between the two ends of the coil of 700 V which calculates to 0.3 x 700 = 210 VAR. The study of high-energy parameters of the generator power circuit was conducted in Figs. 3 - 6 where a bulb was used as an active load. The magnitude/intensity of lamp brightness determined the output power measurement. Lamps used were various capacities from 0.3 watts to 21 watts.

Under the schematic of Fig. 3 switching in various incandescent lamps, for example 0.3 W, did not lead to lighting, although consumption of the circuit energy was 14 x 0.3 = 4.2 watts.

 

Fig.3. Circuit of the experiment to determine the active power output of the L2 coil
We placed an extra coil L3, as in Smith's schematic (Fig. 4). Coil L3 was placed in the upper third of the L2 coil. A 6 volt, 3 watt lamp was connected to the additional coil L3 (see Table) and it showed a subtle glow.

 

Fig.6. Schematic: inserting an incandescent lamp in series through L2 and C2.

Conclusions

The results of exploratory studies confirm the existing scientific thought that the processes of input and output routing/transmission of electricity using high-voltage high-frequency electromagnetic field (radiation) phenomena require further deep theoretical and experimental studies.

References

1. Kanarev FM Beginning Phys chemistry microcosm / Kanarev FM [8th ed.].

Krasnodar, 2007. - 750 s.

2. Fominsky LP Rotary generators of free heat. DIY

Fominsky LP - Cherkasy: "OKO-Plus". 2003. - 342 s.

3. US Patent No. 08/100074.

The phenomena of appearance of excess energy effects have not found a convincing theoretical explanation from the standpoint of existing scientific views. The interesting thing about this paper from Solovey is that the input voltage is so low at a mere 14 volts, although, of course, the output voltage is much higher and is at 1.1 Megahertz. Solovey’s final diagram Fig.6 is interesting in that his 21 watt 12 volt bulb was destroyed in just a few seconds.

The measurement of current through the bulb was 2.1 amps while the bulb’s design current is 1.75 amps. That difference is not enough to have destroyed the bulb so rapidly, so the problem will have been that the bulb wattage was exceeded severely. Earlier, the voltage across the coil “L2” was measured at 700 volts, so there may have been as much as that applied to the twelve volt bulb. If 700 volts were applied to the bulb and a current of 2.1 amps flowed through the bulb, then the dissipated power in the bulb would have been as much as 700 x 2.1 = 1470 watts which is 70 times the rating for the bulb and more than a kilowatt!

Please don’t be misled by the 14 volt input voltage, this circuit steps up the voltage and it could easily kill you. It is said that the high frequency of 1.1 MHz makes the output harmless to humans. I have not tested this and you really need to be careful around any high voltage circuit.

A point which Solovey seems to have missed is the fact that the positioning of the L1 primary coil along the length of the L2 secondary coil has a major effect on the output amperage, so, positioning the L1 coil in the middle of the L2 coil should increase the output power considerably.

The lamp used as the load is essentially a resistive load. I don’t know enough about the subject, but putting a step-down air-core transformer in place of the bulb should lower the output voltage and increase the available output current considerably. However, a transformer is an inductive load and whether or not that change would completely alter the functioning of the circuit remains to be seen.

It might be worth testing the following simple circuit if we were to assume that the output voltage is indeed the 700 volts measured by Solovey and that a resistive load is needed. Three 220-volt 100-watt filament bulbs connected in series would appear to be a satisfactory test load:

Source: A Practical Guide to Free-Energy Devices: Motionless Pulsed Systems - Chapter 3

The nature of Wireless Power Transmission with field tissue is on the earth that contains a great way to exploit electricity. If you want to find a way to harness electricity from the earth, here's another way to help you design: Energy-Tapping Pulsed Systems - Free Energy Generator
In addition, there are many other ways to exploit power, you can refer to:

• Free Energy Generator: The Gravity Wave Detector
• Equipment to extract Electricity from The Air - Nikola Tesla
• A Three Battery Switching System - Free Energy Generator

Conclusion: the nature of Wireless Power Transmission is the exploitation of electric energy in Tesla's universe. See this article: Device to Harness Cosmic Energy by Nikola Tesla, you will know more about Tesla's plan in power transmission. Wireless, and free power generators.