Free Energy Magnetic Motor

Because of its green credentials, there has been a lot of debate going on in recent years about the permanent magnet generator. There has been a lot of documentation on fossil fuels such as oil, gas, and coal being greatly depleted due to heavy consumption over the last few decades, and how the use of these fuels have harmed the environment. The goals of locating or developing renewable fuels have been a top priority for many people, and the best options around are magnetic generators. With the incredible environmentally friendly properties it offers, as well as the money is will save you in the years ahead, these generators can help fill both of these needs in some very innovative and unique ways. Read through the rest of the information below to find out how this works.

What Is A Magnetic Generator And How Does It Work?

A Magnetic Generator has been talked about as an alternative energy source, but exactly what is it and what does it do? Also frequently called a magnet generator, this machine has the capability to produce electricity from magnets. Once there is a small amount of power supplied to get the magnetic power generator going it will supply power, and does not require any additional external power source over the life of the machine. This type of generator can last for a number of years, and a single unit may supply around one third of the energy needed to run a typical home each year.

It is not usually possible to purchase a magnetic generator, and if one can be found they may be quite expensive. A better option is to build one of these machines instead, which can be done for a small cost and a little knowledge. There are many different versions of these plans online, and a quick search for them will reveal many results. Magnet generators uses the powerful pull of magnetic attraction to continue operating the motor of the generator, but a small initial power supply is needed to get the motor started at the beginning.

A magnetic generator can last years, and two or three of them are usually enough to supply all of the electricity required for a typical home. The machine is basically simple, and includes a small motor that has a disc shape. Outside of the motor there are many magnets, which are placed in strategic locations around the motor exterior. Once the small amount of energy is supplied to get the motor started then the magnetic attraction will continue the operation of the motor, and electricity is produced. You do not have to be a specialist to build a magnetic electricity generator, but it will help if you are handy with tools and have the ability to read construction plans.

Before you choose a plan to create a magnetic electric generator plan there are some things that you should examine closely. Look at the actual components involved, and look for testimonials of real people who have actually had one of the machines work. There are some who say that a magnetic generator is a scam while other believe in these machines, and the science behind the operation is sound. There are some websites out there that will try to charge you to access plans to build a magnetic electricity generator, and this fee may be as much as fifty dollars or more, while others offer free plans if you sign up or perform some other action.

Building magnetic generators will not be done in just a few hours, so you should make sure you have at least a weekend set aside for this project. Models which actually work can save you a thousand dollars or more each year, while one of the many scams out there could cost you a significant amount of time, effort, and money, and leave you with nothing to show for your generator project except broken dreams.

A Magnetic Generator is just one of the alternative energy options that are available, but unlike the other types this power source does not rely on any thermal or wind energy. These devices are intended to work no matter what the weather conditions are, and can last from two to five years, or even more according to the information offered by some plans available. A magnetic energy generator may not be the right energy choice for everyone, but this device may be the right answer for some homeowners who want to conserve energy and cut their utility costs.

How to Build a Free Energy Magnetic Motor

Scientific basis and controversies about Free Energy Magnetic Motor

Many have tried building a free energy-producing magnetic motor. I am seeing a lot  in my daily quest through alternative energy news, but what I have learned is that energy is not free, perpetual motion machines do not exist, everything is taken from somewhere and put elsewhere.

Free energy from magnets respects the same rule.

There also is this so-called “free energy”, the zero-point energy, proven mathematically by many scientists. My duty as a green optimistic is to collect everything I see someone has struggled explaining and demonstrating, put it in one place and let the people see and comment. Such is the example of this magnetic motor.

But there are also “green pessimistic” websites. When they see something out of “common sense” boundaries, they freak out and scream something like”omg, this can’t be real! I need no proof! I must not think of this! Perish, Satan!”

I took such an article today as an inspiration because it talks about a magnetic motor, one of my favorite free energy topics, about which I haven’t heard much lately.

Installation diagram for Free Energy Magnetic Motor

Here is the whole process of transforming the free magnetic energy into mechanical energy, explained by the invention’s author (Sandeep Acharya):

“Think of Two Powerful Magnets. One fixed plate over rotating disk with North side parallel to disk surface, and other on the rotating plate connected to small gear G1. If the magnet over gear G1’s north side is parallel to that of which is over Rotating disk then they both will repel each other. Now the magnet over the left disk will try to rotate the disk below in (think) clock-wise direction.

Now there is another magnet at 30 angular distance on Rotating Disk on both side of the magnet M1. Now the large gear G0 is connected directly to Rotating disk with a rod. So after repulsion if Rotating-Disk rotates it will rotate the gear G0 which is connected to gear G1. So the magnet over G1 rotate in the direction perpendicular to that of fixed-disk surface.

Now the angle and teeth ratio of G0 and G1 is such that when the magnet M1 moves 30 degree, the other magnet which came in the position where M1 was, it will be repelled by the magnet of Fixed-disk as the magnet on Fixed-disk has moved 360 degrees on the plate above gear G1. So if the first repulsion of Magnets M1 and M0 is powerful enough to make rotating-disk rotate 30-degrees or more the disk would rotate till error occurs in position of disk, friction loss or magnetic energy loss.

The space between two disk is just more than the width of magnets M0 and M1 and space needed for connecting gear G0 to rotating disk with a rod. Now I’ve not tested with actual objects. When designing you may think of losses or may think that when rotating disk rotates 30 degrees and magnet M0 will be rotating clock-wise on the plate over G2 then it may start to repel M1 after it has rotated about 25 degrees, the solution is to use more powerful magnets.

If all the objects are made precisely with measurements given and the rectangular cubic magnets are powerful enough to rotate more then 30 degrees in first repulsion then the system will work.

Here friction and other losses are neglected as magnets are much more powerful. But think of friction between rotating disk and Shaft, it can be neglected by using magnetic joint between them.

On the left primary measurements of needed objects are given. If you find any reason of not running this mechanism let me know.”

It seems to me that this is basically the Perendev motor presented in the same-named category of our blog. Perendev was charged of scamming some people and even served for a while. Still, maybe someday someone will be able to produce free energy by using magnet motors.

What do you think? Could it work?

Another design for Free Energy Magnetic Motor

Instructions for Creating Self-Sustaining Generators - Magnetic induction Generators:

It will not violate the law of conservation of energy, because there is a source of renewable energy - Radiant Energy

More details: The Secret of Tesla's Power Magnification

-------------------------------------------------------------------------------------------

Maybe you are interested: 

• Tesla Generator: Nikola Tesla's Later Energy Generation Designs
• Nikola Tesla: Great Scientist, Forgotten Genius
• Who Else Wants To Plug A Wire Into The Ground And Produce Electricity (It's Real)
• Tesla Generator - Infinite Energy from Ether

✰* Revealed At Last: Ancient Invention Generates Energy-On-Demand

✔ Nikola Tesla’s method of magnifying electric power by neutralizing the magnetic counter-forces in an electric generator

Generates Energy-On-Demand: Easy Power Plan Will Change Our World Forever

✔ Currents are 180 out of phase with each other, Lenz's law naturally is broken
✔ Principle of Resonance to achieve Overunity
✔ Generate generators without rotating motion, but based on the principle of rotating magnets. Because magnetism varies based on electronic circuit design: coils, capacitors, Negative resistance, etc.The change of magnetism does not require the rotation of the magnet.